研究成果一覧

Update: January 26, 2015


H. Nakano, M. Yuasa, M. Mabuchi and Y. Chino (2014) {10-12} twins in the rolled Mg?Zn?Ca alloy with high formability, J. Mater. Res., 29, 3024-3031.

Hyukjoon Kwon, Hiromi Nakano, Mamoru Mabuchi and Yasumasa Chino (2014) Twinning behaviour of AZ31 Mg alloy alternately compressed in two orthogonal directions, Philosophical Magazine, 94, 3960-3977.

Motohiro Yuasa, Yasumasa Chino and Mamoru Mabuchi (2014) Mechanical and chemical effects of solute elements on generalized stacking fault energy of Mg, Journal of Materials Research, 29, 2576-2586.

Motohiro Yuasa, Naoki Miyazawa, Makoto Hayashi, Mamoru Mabuchi and Yasumasa Chino (2014) Effects of group II elements on the cold stretch formability of Mg-Zn alloys, Acta Materialia, 83, 294-303.

Motohiro Yuasa, Xinsheng Huang, Kazutaka Suzuki, Mamoru Mabuchi and Yasumasa Chino (2014) Effects of microstructure on discharge behavior of AZ91 alloy as anode for Mg-air battery, Materials Transactions, 55, 1202-1207.

Yasumasa Chino, Xinsheng Huang, Kazutaka Suzuki, Motohiro Yuasa and Mamoru Mabuchi (2014) Texture formation and room-temperature formability of rolled Mg-Zn-Ce alloys, Materials Transactions, 55, 1190-1195.

Xinsheng Huang, Yasumasa Chino, Mamoru Mabuchi and Mikio Matsuda (2014) Influence of grain size on mechanical properties and cold formability of Mg-3Al-1Zn alloy sheets with similar weak initial textures, Materials Science and Engineering A, 611, 152-161.

Motohiro Yuasa, Yasumasa Chino, and Mamoru Mabuchi (2014) Molecular dynamics and first-principles study of grain boundary sliding in metals, Trans. Met. Res. Soc. Japan, 39, 31-34.

Hyukjoon Kwon, Mamoru Mabuchi and Yasumasa Chino (2014) Microstructure and mechanical properties of alternately-compressed AZ31 Mg alloy in two orthogonal directions, Materials Transactions, 55, 739-741.

Motohiro Yuasa, Makoto Hayashi, Mamoru Mabuchi and Yasumasa Chino (2014) Improved plastic anisotropy of Mg-Zn-Ca alloys exhibiting high-stretch formability: A first-principles study, Acta Materialia, 65, 207-214.

Motohiro Yuasa, Kohei Masunaga, Mamoru Mabuchi and Yasumasa Chino (2014)Interaction mechanisms of screw dislocations with {10-11} and {10-12} twin boundaries in Mg, Philosophical Magazine, 94, 285-305.

Masataka Hakamada, Motohiro Yuasa, Takashi Yoshida, Fumi Hirashima, Mamoru Mabuchi (2014) Visible-light photocatalysis of ZnO deposited on nanoporous Au, Applied Physics A, 114, 1061-1066.

Motohiro Yuasa, Makoto Hayashi, Mamoru Mabuchi and Yasumasa Chino (2014) Atomic simulations of (10-12), (10-11) twinning and (10-12) detwinning in magnesium, Journal of Physics: Condensed Matter, 26, 015003(1)-(10).

Motohiro Yuasa, Masunaga Kohei, Mamoru Mabuchi, and Yasumasa Chino (2013) Interaction mechanisms of screw dislocations with and twin boundaries in Mg, Philosophical Magazine, 94, 285?305.

Motohiro Yuasa, Kohei Masunaga, Takashi Yoshida, Mamoru Mabuchi, Yasumasa Chino (2013) Interactions of a screw dislocation with a {10-11}-{10-12} double twin in Mg, Acta Materialia, 61, 4714-4725.

Masataka Hakamada, Akitoshi Moriguchi and Mamoru Mabuchi (2013) Fabrication of carbon nanotube/NiOx(OH)y nanocomposite by pulsed electrodeposition for supercapacitor applications, Journal of Power Sources, 245, 324-330.

Masataka Hakamada, Akitoshi Moriguchi and Mamoru Mabuchi (2013) Synthesis of carbon nanotube/Ni nanocomposite film by electrophoresis and electroless deposition without Pd pretreatment, Thin Solid Films, 531, 99-102.

Masataka Hakamada, Satoshi Matsumura and Mamoru Mabuchi (2012) Electrochemical actuation of nanoporous Ni in NaOH solution, Materials Letters, 70, 132-134.

Masataka Hakamada, Fumi Hirashima, Koji Kajikawa and Mamoru Mabuchi (2012) Magnetism of fcc/fcc, hcp/hcp twin and fcc/hcp twin-like boundaries in cobalt, Applied Physics A, 106(1), 237-244.

Masataka Hakamada, Junichi Motomura, Fumi Hirashima and Mamoru Mabuchi (2012) Preparation of nanoporous ruthenium catalyst and its CO oxidation characteristics, Materials Transactions, 53(3), 524-530, 2012.

Masataka Hakamada, Masaki Takahashi and Mamoru Mabuchi (2012) Enzyme electrodes stabilized by monolayer-modified nanoporous Au for biofuel cells, Gold Bulletin, 45(1), 9-15.

Xinsheng Huang (AIST), Kazutaka Suzuki (AIST), Yasumasa Chino (AIST) and Mamoru Mabuchi (2012) Influence of rolling temperature on static recrystallization behavior of AZ31 magnesium alloy, Journal of Materials Science, 47, 4561-4567.

Motohiro Yuasa, Daiki Nishihara, Mamoru Mabuchi and Yasumasa Chino (AIST) (2012) Hydrogen embrittlement in a magnesium grain boundary: a first-principles study, Journal of Physics: Condensed Matter, 24, 085701(1)-(9).

Motohiro Yuasa and Mamoru Mabuchi (2012) Grain boundary embrittlement of Fe induced by P segregation: First-principles tensile tests, Advanced Materials Research, 409, 455-460.

Kazutaka Suzuki (AIST), Yasumasa Chino (AIST), Xinsheng Huang (AIST) and Mamoru Mabuchi (2011) Elastic and damping properties of AZ31 magnesium alloy sheet processed by high-temperature rolling, Materials Transactions, 52, 2040-2044.

Hitomi Nakano (Toyohashi University of Technology), Tasaburo Saji (MSP Corp.), Motohiro Yuasa, Syoji Miyake (MSP Corp.) and Mamoru Mabuchi (2011) Rapid synthesis and structural analysis of Li-Nb-Ti-O solid solutions with superstructure by millimeter-wave heating, Journal of the Ceramic Society of Japan, 119, 808-812.

Y. Chen, A.Yamazaki, H. Kusuda, E. Kusaka & M. Mabuchi (2012) Microcrack growth in granite during fatigue process, Harmonising Rock Engineering and the Environment: Proceedings of the 12th ISRM International Congress on Rock Mechanics, eds. Q. Qian & Y. Zhou, pp.581-584.

陳友晴, 別所昌彦, 伊藤俊秀, 濱野哲英, 薄善行 (2011) テラヘルツテクノロジーの資源開発分野への適用可能性, Journal of MMIJ, 127, 719-723.

Masataka Hakamada, Masaki Takahashi and Mamoru Mabuchi (2011) Enhanced thermal stability of laccase immobilized on monolayer-modified nanoporous Au, Materials Letters, 66, 4-6.

Yasumasa Chino (AIST), Takamichi Ueda, Motohisa Kado and Mamoru Mabuchi (2011) Solid solution softening mechanisms in Mg-Ca alloy, Materials Transactions, 52, 1840-1843.

Yasumasa Chino (AIST), Takamichi Ueda, Yuki Otomatsu, Kensuke Sassa (AIST), Xinsheng Huang (AIST), Kazutaka Suzuki (AIST) and Mamoru Mabuchi (2011) Effects of Ca on tensile properties and stretch formability at room temperature in Mg-Zn and Mg-Al alloys, Materials Transactions, 52, 1477-1482.

Motohiro Yuasa and Mamoru Mabuchi (2011) First-Principles Study on Enhanced Grain Boundary Embrittlement of Iron by Phosphorus Segregation, Materials Transaction, 52, 1369-1373.

Yasumasa Chino (AIST), Takamichi Ueda, Motohisa Kado and Mamoru Mabuchi (2011) Electronic structure and solid solution softening in iron alloys, Materials Transactions, 52, 1324-1326.

Yasumasa Chino (AIST), Daiki Nishihara, Takamichi Ueda and Mamoru Mabuchi (2011) Effects of hydrogen on the mechanical properties of pure magnesium, Materials Transactions, 52, 1123-1126.

Yasumasa Chino (AIST), Xinsheng Huang (AIST), Kazutaka Suzuki (AIST), Kensuke Sassa (AIST) and Mamoru Mabuchi (2011) Microstructure, texture and mechanical properties of Mg-Zn-Ce alloy extruded at different temperatures, Materials Transactions, 52, 1104-1107.

Masataka Hakamada, Masaki Takahashi, Toshiyuki Furukawa, Kazuki Tajima (AIST), Kazuki Yoshimura (AIST), Yasumasa Chino (AIST) and Mamoru Mabuchi (2011) Electrochemical stability of self-assembled monolayers on nanoporous Au, Physical Chemistry Chemical Physics, 13, 12277-12284.

Yasumasa Chino (AIST), Motohisa Kado, Tamichi Ueda and Mamoru Mabuchi (2011) Solid Solution Strengthening for Mg-3.0 Mass Pct(2.71 At. Pct)Al and Mg-0.06 Mass Pct (0.036 At. Pct)Ca Alloys, Metallurgical and Materials Transactions, 42A, 1965-1973.

Xinsheng Huang (AIST), Kazutaka Sizuki (AIST), Yasumasa Chino (AIST) and Mamoru Mabuchi (2011) Improvement of stretch formability of Mg-3Al-1Zn alloy sheet by high temperature rolling at finishing pass, Journal of Alloys and Compounds, 509, 7579-7584.

Masataka Hakamada, Toshiyuki Furukawa, Tao Yamamoto, Masaki Takahashi and Mamoru Mabuchi (2011) Abnormal hydrogen absorption/desorption properties of nanoporous Pt with large lattice strains, Materials Transactions, 52, 806-809.

Masataka Hakamada, Fumi Hirashima, Masaki Takahashi, Takumi Nakazawa and Mamoru Mabuchi (2011) Large-strain-induced magnetic properties of Co electrodeposited on nanoporous Au, Journal of Applied Physics, 109, 08431.

袴田昌高,千野靖正(産総研),馬渕守(2011)合金化/脱合金化による白金板表面のナノポーラス構造形成,日本金属学会誌, 75, 42-46.

千野靖正(産総研),佐々健介(産総研),黄新ショウ(産総研),鈴木一孝(産総研),馬渕守(2011)Mg-Zn-Ca合金圧延材の室温張出し成形性に及ぼす亜鉛濃度の影響,日本金属学会誌, 75, 35-41.

Youqing Chen, Kota Watanabe, Hiromu Kusuda, Eishi Kusaka and Mamoru Mabuchi (2011) Crack growth in Westerly granite during a cyclic loading test, Engineering Geology, 117, 189-197.

Toshihide Ito (Kansai Univ.), Youqing Chen, Shoichi Ito (Kwansei Gakuin Univ.), Kaoru Yamaguchi (The Institute Energy Economics, Japan) (2010) Prospect of the upper limit of the energy demand in China from regional aspects, ENERGY, 35, 5320-5327.

Masataka Hakamada, Yasumasa Chino (AIST) and Mamoru Mabuchi (2010) Nanoporous surface fabricated on metal sheets by alloying/dealloying technique, Materials Letters 64, 2341-2343.

Masataka Hakamada, Masaki Takahashi, Toshiyuki Furukawa and Mamoru Mabuchi (2010) Surface effects on saturation magnetization in nanoporous Ni, Philosophical Magazine 90, 1915-1924.

Motohiro Yuasa and Mamoru Mabuchi (2010) Effects of segregated Cu on an Fe grain boundary by first-principles tensile tests, Journal of Physics: Condensed Matter, 22, 505705.

Motohiro Yuasa and Mamoru Mabuchi (2010) Bond mobility mechanism in grain boundary embrittlement: First-principles tensile tests of Fe with a P-segregated Σ3 grain boundary, Physical Review B, 82, 094108.

Motohiro Yuasa, Takumi Nakazawa and Mamoru Mabuchi (2010) Atomic simulations of dislocation emission from Cu/Cu and Co/Cu grain boundaries, Materials Science and Engineering A, 528, 260-267.

Motohiro Yuasa, Kota Kajikawa, Takumi Nakazawa, Masataka Hakamada and Mamoru Mabuchi (2010) Deformation behavior of an ultrafine-grained two-phase Co-Cu alloy processed by electrodeposition, Scripta Materialia, 63,132-135.

Masataka Hakamada (AIST), Kazuki Tajima (AIST), Kazuki Yoshimura (AIST), Yasumasa Chino (AIST) and Mamoru Mabuchi (2010) Solid/electrolyte interface phenomena during anodic polarization of Pd0.2M0.8 (M=Fe, Co, Ni) alloys in H2SO4, Journal of Alloys and Compounds, 494, 309-314.

Motohiro Yuasa, Takumi Nakazawa and Mamoru Mabuchi (2010) Atomic simulation of grain boundary sliding in Co/Cu two-phase bicrystals, Materials Science and Engineering A, 527, 2629-2636.

Masataka Hakamada (AIST), Hiromi Nakano (Toyohasi University of Technology), Toshiyuki Furukawa, Masaki Takahashi and Mamoru Mabuchi (2010) Hydrogen storage properties of nanoporous palladium fabricated by dealloying, The Journal of Physical Chemistry, 114, 868-873.

伊藤俊秀(関西大学),別所昌彦(関西大学),陳友晴,野村泰稔(立命館大学)(2010) 遺伝的アルゴリズムによる石灰石鉱山の品位調整を目的とした採掘シミュレーション, Journal of MMIJ, 126, 78-83.

Masataka Hakamada (AIST) and Mamoru Mabuchi (2009) Preparation of nanoporous Ni and Ni-Cu by dealloying of rolled Ni-Mn and Ni-Cu-Mn alloys, Journal of alloys and compounds, 485, 583-587.

Masataka Hakamada (AIST), Masaki Takahashi, Toshiyuki Furukawa and Mamoru Mabuchi (2009) Coercivity of nanoporous Ni produced by dealloying, Applied Physics Letters, 94, 153105(1)-(3).

Masayuki Kobayashi, Yuichiro Kuriki, Kota Watanabe, Youqing Chen, Hiromu Kusuda and Mamoru Mabuchi (2009) Microcrack growth patterns in Westerly granite specimens subjected to uniaxial cyclic loading, International Journal of the Japanese Committee for Rock Mechanics, 5, 103-110.

Masataka Hakamada (AIST), Yasumasa Chino (AIST) and Mamoru Mabuchi (2009) Nanoporous Ni and Ni-Cu fabricated by dealloying , Proc. Materials Research Society Fall Meeting 2009 (Dec., 2009).

Motohiro Yuasa, Hiromi Nakano (Toyohasi University of Technology), Kota Kajikawa, Takumi Nakazawa and Mamoru Mabuchi (2009) Deformation behavior of nanocrystalline Co-Cu alloys, Proc. Materials Research Society Fall Meeting 2009 (Dec., 2009).

Mamoru Mabuchi (2009) Roadmap of R&D in Light Metals, Proc. The 9th international conference on ecomaterials (ICEM9), (Nov., 2009).

Motohiro Yuasa, Kota Kajikawa, Masataka Hakamada (AIST) and Mamoru Mabuchi (2009) Saturation magnetization in supersaturated solid solution of Co-Cu alloy, Applied Physics Letters, 95, 162502.

Y. Chen, K. Watanabe, M. Kobayashi, H. Kusuda, E. Kusaka and M. Mabuchi (2009) Crack growth in granite specimens subjected to cyclic uniaxial loading, International Symposium on Geological Engineering Problems in Major Construction Projects in the 7th Asian Regional Conference of IAEG (Sep., 2009), 528-532.

Yasumasa Chino (AIST), Kensuke Sassa (AIST) and Mamoru Mabuchi (2009) Stretch formability of Mn-free AZ31 Mg alloy rolled at high temperature (723 K), Journal of Materials Science, 44, 4593-4598.

Motohiro Yuasa, Hiromi Nakano (Toyohasi University of Technology) and Mamoru Mabuchi (2009) Development of nanocrystalline Co-Cu alloys for energy applications, Proc. ZERO CARBOM ENERGY KYOTO 2009 (Aug., 2009), p.103.

千野靖正(産総研),馬渕守 (2009) 冷間プレス成形性向上を目指した新Mg合金圧延材の開発,塑性と加工, 50, 897-901.

千野靖正(産総研),馬渕守 (2009) 常温プレス成形が可能な新マグネシウム合金圧延材の開発,アルトピア, 39(2), 17-23.

千野靖正(産総研),馬渕守 (2009) マグネシウム合金切削屑の押出し固化による高性能再生材の創製,科学と工業,83, 350-355.

Hiromi Nakano (Toyohasi University of Technology), Motohiro Yuasa and Mamoru Mabuchi (2009) Changes in the grain boundaries of a nanolamellar structured Co-Cu alloy by annealing, Scripta Materialia, 61, 371-374.

Claude Inserra, Shiro Biwa and Youqing Chen (2009) Nonlinear ultrasonic characterization of thermally damaged Westerly granite, Japanese Journal of Applied Physics, Vol.48, No.07GD03, 1-6.

Masataka Hakamada (AIST) and Mamoru Mabuchi (2009) Fabrication of nanoporous palladium by dealloying and its thermal coarsening, Journal of Alloys and Compounds, 479, 362-329.

Yasumasa Chino (AIST), Kensuke Sassa (AIST) and Mamoru Mabuchi (2009) Texture and stretch formability of a rolled Mg-Zn alloy containing dilute content of Y, Materials Science and Engineering A, 513-514, 394-400.

Yasumasa Chino (AIST), Kensuke Sassa (AIST) and Mamoru Mabuchi (2009) Enhanced stretch formability of Mn-free AZ31 Mg alloy rolled by cross-roll rolling, Journal of Materials Science, 44, 1821-1827.

Yasumasa Chino (AIST), Katsuya Kimura and Mamoru Mabuchi (2009) Deformation characteristics at room temperature under biaxial tensile stress in textured AZ31 Mg alloy sheets, Acta Materialia, 57, 1476-1485.

Motohiro Yuasa, Hiromi Nakano (Ryukoku Univ.), Yoshiaki Nakamoto and Mamoru Mabuchi (2009) Effect of annealing on mechanical properties and nanoscale lamellar structure in Co-Cu alloy, Materials Transactions, 50, 570-578.

Motohiro Yuasa, Hiromi Nakano (Ryukoku Univ.), Yoshiaki Nakamoto, Masataka Hakamada (AIST) and Mamoru Mabuchi (2009) Ferromagnetic properties of Co-Cu alloy with nanoscale lamellar structure, Materials Transactions, 50, 419-422.

Masataka Hakamada (AIST) and Mamoru Mabuchi (2009) Preparation of nanoporous palladium by dealloying: Anodic polarization behaviors of Pd-M (M=Fe,Co,Ni) alloys, Materials Transactions, 50, 431-435.

Masataka Hakamada (AIST) and Mamoru Mabuchi (2009) Thermal coarsening of nanoporous gold: Melting or recrystallization, Journal of Materials Research, 24, 301-304.

Yasumasa Chino (AIST) and Mamoru Mabuchi (2009) Enhanced stretch formability of Mg-Al-Zn alloy sheets rolled at high temperature (723 K), Scripta Materialia, 60, 447-450.

Masataka Hakamada (AIST) , Hiroyuki Watanabe (Osaka Municipal Tech. Res. Inst.), Tetsumune Kuromura, Youqing Chen, Hiromu Kusuda and Mamoru Mabuchi (2009) Effects of pore characteristics finely-controlled by spacer method on damping capacity of porous aluminum, Materials Transactions, 50, 427-429.

R.Fernandez (C.S.I.C.), M.Mabuchi, K.Higashi (Osaka Pref. Univ.) and G.Gonzalez-Doncel (C.S.I.C.) (2009) Texture evolution with superplastic deformation of a AlCu4Mg/Si3N4/20p composite, Composites Science and Technology, 69, 373-377.

Youqing Chen (2008) Observation of microcracks patterns in Westerly granite specimens stressed immediately before failure by uniaxial compressive loading, Chinese Journal of Rock Mechanics and Engineering, 27(12), 2440-2448.

伊藤俊秀(関西大学),陳友晴,伊藤正一(関西学院大学) (2008) 地域差を考慮した中国の銅需要に関する考察,Journal of MMIJ, 124, 856-863.

Yasumasa Chino (AIST), Kensuke Sasa (AIAT) and Mamoru Mabuchi (2008) Texture and stretch formation of Mg-1.5mass%Zn-0.2mass%Ce alloy rolled at different rolling temperatures, Materials Transactions, 49, 2916-2918.

Youqing Chen, Tsunehiro Kobayashi, Yuichiro Kuriki, Hiromu Kusuda, and Mamoru Mabuchi (2008) Observation of microstructures in granite samples subjected to one cycle of heating and cooling, Journal of the Japan Society of Engineering Geology, 49(4), 217-226.

Motohiro Yuasa, Hiroshi Matsumoto, Masataka Hakamada (AIST) and Mamoru Mabuchi (2008) Effects of vacancies on deformation behavior in nanocrystalline Nickel, Materials Transactions, 49, 2315-2321.

Yasumasa Chino (AIST), Motohisa Kado and Mamoru Mabuchi (2008) Enhancement of tensile ductility and stretch formability of magnesium by addition of 0.2wt%(0.035at%)Ce, Materials Science and Engineering A, 494, 343-349.

Motohiro Yuasa, Kota Kajikawa, Masataka Hakamada (AIST) and Mamoru Mabuchi (2008) A superelastic nanocrystalline Cu-Sn alloy thin film processed by electroplating, Materials Letters, 62, (2008), 4473-4475.

Masataka Hakamada (AIST), Yuuki Asao, Naobumi Saito and Mamoru Mabuchi (2008) Microfluidic flows in metallic microchannels fabricated by the space method, Journal of Micromechanics and Microengineering, 18, 075029(1)-(7).

陳友晴,伊藤俊秀(関西大学),伊藤正一(関西学院大学),山口馨(日本エネルギー経済研究所) (2008) 地域差を考慮した中国のエネルギー需要の上限に関する考察:日本と米国のエネルギー消費量を用いた推計の試み, エネルギー・資源学会誌, 29(4), 8-15.

Yasumasa Chino (AIST), Kensuke Sassa (AIST) and Mamoru Mabuchi (2008) Enhancement of tensile ductility of magnesium alloy processed by torsion extrusion, Scripta Materialia, 59, 399-402.

Yasumasa Chino (AIST), Kensuke Sassa (AIST) and Mamoru Mabuchi (2008) Tensile properties and stretch formability of Mg-1.5mass%Zn-0.2mass%Ce sheet rolled at 723 K, Materials Transactions, 49, 1710-1712.

Y.Chino (AIST), K.Kimura and M.Mabuchi (2008) Twining behavior and deformation mechanisms of extruded AZ31 Mg alloy, Materials Science and Engineering A, 486, 481-488.

Y.Chino (AIST), K.Kimura, M.Hakamada (AIST) and M.Mabuchi (2008) Mechanical anisotropy due to twining in an extruded AZ31 Mg alloy, Materials Science and Engineering A, 485, 311-317.

Y.Chino (AIST) and M.Mabuchi (2008) Deformation characteristics of recycled AZ91 Mg alloy containing oxide contaminants, Materials Transactions, 49, 1093-1100.

Q.Wang (Shanghai Jiao Tong Univ.), Y.Wei (Shanghai Jiao Tong Univ.), Y.Chino (AIST) and M.Mabuchi (2008) High strain rate superplasticity of rolled AZ91 magnesium alloy, Rare Metals, 27, 46-49.

Y.Chino (AIST), K.Kimura and M.Mabuchi (2008) Direction dependence of compressive properties of Mg processed by directional solidification, Materials Transactions, 62, 483-486.

M.Hakamada (AIST), Y.Asao, T.Kuromura, Y.Chen, H.Kusuda and M.Mabuchi (2008) Processing of three-dimensional metallic microchannels by spacer method, Materials Letters, 62, 1118-1121.

Y.Chino (AIST), K.Sassa (AIST), A.Kamiya (AIST) and M.Mabuchi (2008) Stretch formability at elevated temperature of a cross-rolled AZ31 Mg alloy sheet with different rolling routes, Materials Science and Engineering A,473, 195-200.

Y.Chino (AIST), M.Kado and M.Mabuchi (2008) Compressive deformation behavior at room temperature - 773 K in Mg-0.2mass% (0.035at.%) Ce alloy, Acta Materialia, 56, 387-394.

M.Hakamada (AIST) and M.Mabuchi (2008) Microstructural evolution in nanoporous gold by thermal and acid treatment, Materials Letters, 62, 483-486.

Y.Nakamoto, M.Yuasa, Y.Chen, H.Kusuda and M.Mabuchi (2008) Mechanical properties of a nanocrystalline Co-Cu alloy with a high-density fine nanoscale lamellar structure, Scripta Materialia, 58, 731-734.

Yasumasa Chino (AIST), Kensuke Sassa (AIST), Akira Kamiya (AIST), Naobumi Saito (AIST) and Mamoru Mabuchi (2007) Mechanical properties and press formability of Mg alloy processed by cross-roll rolling, Materials Science Forum, 561-565, 179-182.

Masataka Hakamada (AIST), Yuuki Asao, Tetsumune Kuromura, Youqing Chen, Hiromu Kusuda and Mamoru Mabuchi (2007) Influence of density on the compressive properties in porous copper produced by spacer method, Materials Science Forum, 561-565, 1661-1664.

Masataka Hakamada (AIST) and M. Mabuchi (2007) Processing of nanoporous gold by dealloying and its morphological control, Materials Science Forum, 561-565, 1657-1660.

M.Hakamada (AIST), Y.Nakamoto, H.Matsumoto, H.Iwasaki (High Process Research Ltd. Co.), Y.Chen, H.Kusuda and M.Mabuchi (2007) Comparison of mechanical properties of thin copper films processed by electrodeposition and rolling, Materials Transactions, 48, 2336-2339.

Y.Chino (AIST), H.Iwasaki (AIST) and M.Mabuchi (2007) Stretch formability of AZ31 Mg alloy sheets at different testing temperatures, Materials Science and Engineering A, 466, 90-95.

M.Hakamada, T.Furuta, Y.Chino (AIST), Y.Chen, H.Kusuda and M.Mabuchi (2007) Life cycle inventory study on magnesium alloy substitution in vehicles, Energy, 32, 1352-1360.

M.Hakamada, T.Kuromura, Y.Chino (AIST), Y.Yamada (AIST), Y.Chen, H.Kusuda and M.Mabuchi (2007) Monotonic and cyclic compressive properties of porous aluminum fabricated by spacer method, Materials Science and Engineering A, 459, 286-293.

M.Hakamada and M.Mabuchi (2007) Mechanical strength of nanoporous gold fabricated by dealloying, Scripta Materialia, 56, 1003-1006.

M.Hakamada, Y.Asao, T.Kuromura, Y.Chen, H.Kusuda and M.Mabuchi Density dependence of the compressive properties of porous copper over a wide density range, Acta Materialia, 55, 2291-2299.

M.Hakamada, Y.Nakamoto, H.Matsumoto, H.Iwasaki (High Process Research Ltd. Co.), Y.Chen, H.Kusuda and M.Mabuchi (2007) Relationship between hardness and grain size in electrodeposited copper films, Materials Science and Engineering A, 457, 120-126.

Y.Chino (AIST), Y.Nakaura (Mitsubishi Aluminum Co.Ltd.), K.Ohori (Mitsubishi Aluminum Co.Ltd.), A.Kamiya (AIST) and M.Mabuchi (2007) Mechanical properties at elevated temperature of a hot-deformed Mg-Al-Ca-Mn-Sr alloy, Materials Science and Engineering A, 452-453, 31-36.

M.Hakamada, Y.Asao, T.Kuromura, Y.Yamada (AIST), Y.Chen, H.Kusuda and M.Mabuchi (2007) Compressive properties of porous metals with homogeneous pore characteristics, Key Engineering Materials, 340-341, 415-420.

Y.Chen, Y.Nomura (Kobe Univ.), T.Ito (Kansai Univ.), M.Hirokane (Kansai Univ.) and H.Furuta (Kansai Univ.) (2007) Application of the Chaos Theory to Rock Analysis by Hammer Tests, Proc. The Eleventh International Conference on Civil, Structural and Environmental Engineering Computing, Paper 231.

Y.Chen, M.Kobayashi, Y.Kuriki, H.Kusuda and M.Mabuchi (2007) Observation on microcrack growth patterns in Westerly granite specimens subjected to cyclic uniaxial loading, Proc. The 6th Asian Regional Conference on Geohazards in Engineering Geology, p.132.

M.Hakamada, Y.Asao, T.Kuromura, Y.Chen, H.Kusuda and M.Mabuchi (2007) Fabrication of copper microchannels by the spacer method, Scripta Materialia, 56(9), 781-783.

Y.Chino (AIST), K.Sassa (AIST), A.Kamiya (AIST) and M.Mabuchi (2006) Enhanced formability et elevated temperature of a cross-rolled magnesium alloy sheet, Materials Science and Engineering A, 441(1-2), 349-356.

Y.Chino (AIST), K.Sassa (AIST), A.Kamiya (AIST) and M.Mabuchi (2007) Microstructure and press formability of a cross-rolled magnesium alloy sheet, Materials Letters, 61(7), 1504-1506.

M.Hakamada, T.Kuromura, Y.Chen, H.Kusuda and M.Mabuchi (2007) Influence of porosity and pore size on electrical resistivity of porous aluminum produced by spacer method, Materials Transactions, 48(1), 32-36.

M.Hakamada, T.Kuromura, Y.Chen, H.Kusuda and M.Mabuchi (2006) Sound absorption characteristics of porous aluminum fabricated by spacer method, Journal of Applied Physics, 100(11), Art. No. 114908.

H.Hosokawa (AIST), H.Matsumoto, M.Hakamada and M.Mabuchi (2006) Tensile ductility at room temperature of nanocrystalline Ni-W alloy, Journal of Materials Science, 41(24), 8372-8376.

T.Kuromura, M.Hakamada, Y.Chen, H.Kusuda and M.Mabuchi (2007) Sound absorption behavior of porous Al produced by spacer method, Advanced Materials Research, 15-17, 422-427.

M.Hakamada, Y.Yamada (AIST), T.Kuromura, Y.Asao, Y.Chen, H.Kusuda and M.Mabuchi (2007) Porous metals produced by spacer method as ecomaterials, Advanced Materials Research, 15-17, 416-421.

M.Mabuchi and Y.Chino (AIST) (2007) Superior corrosion resistance and mechanical properties of a Mg alloy recycled by solid-state process, Materials Science Forum, 539-543, 1656-1661.

Y.Chino (AIST), K.Sassa (AIST), A.Kamiya (AIST) and M.Mabuchi (2007) Enhancement of press formability of rolled Mg alloy sheet by using cross rolling processes, Materials Science Forum, 539-543, 1615-1619.

Y.Chino (AIST), K.Sassa (AIST), A.Kamiya (AIST) and M.Mabuchi (2006) Influence of rolling routes on press formability of a rolled AZ31 Mg alloy sheet, Materials Transactions, 47(10), 2555-2560.

Y.Chino (AIST), T.Hoshika (AIST) and M.Mabuchi (2006) Mechanical and corrosion properties of AZ31 magnesium alloy repeatedly recycled by hot extrusion, Materials Transactions, 47(4), 1040-1046.

Y.Chino (AIST), T.Furuta, M.Hakamada and M.Mabuchi (2006) Fatigue behavior of AZ31 magnesium alloy produced by solid-state recycling, Journal of Materials Science, 41(11), 3229-3232.

Y.Chino (AIST), T.Hoshika (AIST) and M.Mabuchi (2006) Enhanced corrosion properties of pure Mg and AZ31 Mg alloy recycled by solid-state process, Materials Science and Engineering A, 435-436, 275-281.

M.Hakamada, T.Kuromura, Y.Chen, H.Kusuda and M.Mabuchi (2006) High sound absorption of porous aluminum fabricated by spacer method, Applied Physics Letters, 88(25), Art. No. 254106.

M.Hakamada, T.Wajima (Saga Univ.), Y. Ikegami (Saga Univ.), Y.Chen, H.Kusuda and M.Mabuchi (2006) Fluid conductivity of porous aluminum fabricated by powder-metallurgical spacer method, Japanese Journal of Applied Physics Part 2, 45(22), L575-L577.

Y.Chino (AIST), T.Furuta, M.Hakamada and M.Mabuchi (2006) Influence of distribution of oxide contaminants on fatigue behavior in AZ31 Mg alloy recycled by solid-state processing, Materials Science and Engineering A, 424(1-2), 355-360.

M.Hakamada and M.Mabuchi (2006) Nanoporous gold prism microassembly through a self-organizing route, Nano Letters, 6(4), 882-885.

Y.Chino (AIST), M.Mabuchi, K.Sassa (AIST) and S.Asai (Nagoya Univ.) (2006) Processing and mechanical properties of a porous low carbon steel with a controlled porous structure by imposition of a static magnetic field, Mater. Sci. Eng., A 417(1-2), 281-286.

K.Matsuzaka (Tokyo Dental College), M.Yoshinari (Tokyo Dental College), E.Kokubu (Tokyo Dental College), M.Shimono (Tokyo Dental College), Y.Yamada (AIST), M.Mabuchi and T.Inoue (AIST) (2005) Bone formation in titanium porous scaffold with immobilization of BMP-2, J. Oral Tissue Eng., 2, 60-65.

M.Hakamada, Y.Yamada (AIST), T.Kuromura and M.Mabuchi (2005) Fatigue of porous aluminum fabricated by the spacer method, Porous Metals and Metal Foaming Technology, 581-584.

M.Hakamada, Y.Yamada (AIST), T.Nomura, T.Kuromura and M.Mabuchi (2005) Mechanical properties of porous aluminum fabricated by the spacer method, Porous Metals and Metal Foaming Technology, 577-580.

M.Hakamada, T.Nomura, T.Kuromura, Y.Yamada (AIST) and M.Mabuchi (2005) Processing of porous aluminum by the spacer method, Porous Metals and Metal Foaming Technology, 393-396.

Y.Chino (AIST), K.Sassa (AIST), Y.Yamada (AIST), M.Hakamada, M.Mabuchi and S.Asai (Nagoya Univ.) (2005) Cell structure control of porous material made of steel fiber by imposition of a static magnetic field, Porous Metals and Metal Foaming Technology, 333-336.

H.Hosokawa (AIST), T.Nakajima (AIST), K.Shimojima (AIST) and M.Mabuchi (2006) Effect of grain size on surface morphology after focused ion beam micro-machining for cemented carbides, Int. J. Nanoscience, 4, 767-772.

Y.Chino (AIST), T.Hoshika (AIST), J.S.Lee (AIST) and M.Mabuchi (2005) Mechanical properties of AZ31 Mg alloy recycled by severe deformation, J. Mater. Res., 21(3), 754-760, 2006.

J.S.Lee (AIST), Y.Chino (AIST), H.Hosokawa (AIST), K.Shimojima (AIST), Y.Yamada (AIST) and M.Mabuchi (2005) Deformation characteristics at elevated temperature in recycled 5083 aluminum alloy by solid state recycling, Mater. Trans., 46, 2637-2640.

Y.Chino (AIST), J.S.Lee (AIST), Y.Nakaura (Mitsubishi Aluminum Co.), K.Ohori (Mitsubishi Aluminum Co.) and M.Mabuchi (2005) Mechanical properties of Mg-Al-Ca alloy recycled by solid-state recycling, ,Mater. Trans., 46, 2592-2595.

Y.Chino (AIST), J.-S.Lee (AIST), K.Sassa (AIST), A.Kamiya (AIST) and M.Mabuchi (2005) Press formability of a rolled AZ31 Mg alloy sheet with controlled texture, Mater. Lett., 60, 173-176.

千野靖正(産総研), 馬渕守 (2005) マグネシウム合金のリサイクル技術, 金属,75,1297-1302.

細川裕之(産総研), 下島康嗣(産総研), 馬渕 守 (2005) WC-Co超硬合金の集束イオンビーム微細加工における面粗さに及ぼす組織と加工条件の影響,材料,54,993-998.

H.Hosokawa (AIST), T.Nakajima (AIST), K.Shimojima (AIST) and M.Mabuchi (2005) Surface evolution during focused ion beam micro-machining in (001) plane of single-crystalline Ni and amorphous nickel alloy, Mater. Trans., 46, 2295-2297.

M.Hakamada, T.Nomura, T.Kuromura, Y.Yamada (AIST) and M.Mabuchi (2005) Compressive properties of porous aluminum fabricated at various conditions by the spacer method, Advances in Ecomaterials, 419-426.

M.Hakamada, T.Nomura, Y.Yamada (AIST), Y.Chino (AIST), H.Hosokawa (AIST), T.Nakajima (AIST), Y.Chen, H.Kusuda and M.Mabuchi (2005) Compressive properties at elevated temperatures of porous aluminum processed by the spacer method, J. Mater. Res., 20, 3385-3390.

M.Hakamada, Y.Yamada (AIST), T.Nomura, Y.Chen, H.Kusuda and M.Mabuchi (2005) Fabrication of porous aluminum by spacer method consisting of spark plasma sintering and sodium chloride dissolution, Mater. Trans., 46, 2624-2628.

M.Hakamada, T.Nomura, Y.Yamada (AIST), Y.Chino (AIST), Y.Chen, H.Kusuda and M.Mabuchi (2005) Compressive deformation behavior at elevated temperatures in a closed-cell aluminum foam, Mater. Trans., 46, 1677-1680.

Y.Chino (AIST), L.J.Soel (AIST) and M.Mabuchi (2005) Upgrade recycling of AZ31 Mg alloy machined chips by solid state recycling with high extrusion ratio, Advances in Ecomaterials, 283-289.

L.J.Soel (AIST), Y.Chino (AIST) and M.Mabuchi (2005) Deformation characteristics at elevated temperature in recycled AZ91 magnesium alloy by solid state recycling, Advances in Ecomaterials, 271-276.

K.Shimojima (AIST), H.Hosokawa (AIST), M.Mabuchi, M.Kawakami (Fuji Die Co., Ltd.) and M.Mizukami (2005) Fabrication of binder-free WC by pulsed current sintering and its mechanical properties, 16th International Plansee Seminar 2005, 595-606.

Y.Chino (AIST), M.Mabuchi, T.Hoshika (AIST), L.J.Soel (AIST), K.Shimojima (AIST), H.Hosokawa (AIST), Y.Yamada (AIST) and H.Iwasaki (AIST) (2005) Superplastic forming of AZ31 Mg alloy recycled by solid-state processing, Materials Science Forum, 488-489, 567-570.

H.Hosokawa (AIST), K.Shimojima (AIST), M.Kawakami (Fuji Die Co., Ltd.), S.Sano (Fuji Die Co., Ltd.), O.Terada (Fuji Die Co., Ltd.) and M.Mabuchi (2005) Superplastic behavior and cavitation for WC-Co cemented carbides, Materials Science Forum, 475-479, 2991-2994.

M.Mabuchi, Y.Chino (AIST) and H.Iwasaki (AIST) (2005) An investigation of cavity growth rate in superplastic Al and Mg alloys, Materials Science Forum, 475-479, 2945-2948.

Y.Chino (AIST), M.Mabuchi, T.Hoshika (AIST), L.J.Soel (AIST), K.Shimojima (AIST), H.Hosokawa (AIST), Y.Yamada (AIST) and H.Iwasaki (AIST) (2005) Blow forming of recycled 5083 Al alloy and AZ31 Mg alloy by solid state recycling, Materials Science Forum, 475-479, 2919-2922.

Y.Yamada (AIST), C.E.Wen (AIST), T.Asahina (AIST), K.Kato (AIST), T.Sonoda (AIST) and M.Mabuchi (2005) Compressive properties and energy absorption of hollow sphere aluminum, Materials Science Forum, 475-479, 333-336.

馬渕守, 千野靖正(産総研) (2005) 固体リサイクル, マグネシウム合金の成形加工技術の最前線, 237-244.

馬渕守 (2005) 低環境負荷を指向した超軽量金属材料, 環境資源工学, 52, 76-80.

馬渕守 (2005) マグネシウム:21世紀の新材料, 基礎機械材料(書籍), 167-169.

馬渕守, 千野靖正(産総研) (2005) 金属系新素材, ものづくりの原点 素形材技術(書籍), 153-165.

馬渕守(2004) 超塑性成形加工, マグネシウム加工技術, 137-144.

馬渕守(2004) 超軽量ポーラス金属の創製, 水曜會誌, 23, 775-777.

H.Hosokawa (AIST), K.Shimojima (AIST), H.Iwasaki (AIST) and M.Mabuchi (2004) Nanomachining of nanocrystalline nickel by focused ion beam, Philos. Mag. Lett., 84, 713-718.

Y.Chino (AIST), H.Iwasaki (AIST) and M.Mabuchi (2004) Cavity growth rate in superplastic 5083 Al and AZ31 Mg alloys, J. Mater. Res., 19, 3382-3388.

M.Hakamada, Y.Yamada (AIST), T.Nomura, H.Kusuda, Y.Chen and M.Mabuchi (2005) Effect of sintering temperature on compressive properties of porous aluminum produced by spark plasma singering, Mater. Trans., 46, 186-188.

Y. Chino (AIST), M. Mabuchi, K. Shimojima (AIST), H. Hosokawa (AIST), Y. Yamada (AIST), C. E. Wen (AIST) and H. Iwasaki (AIST) (2004) Solid state recycling of 5083 Al alloy by hot extrusion. Trans. Mater. Res. Soc. Japan, 29, 1893-1896.

M. Mabuchi, Y. Chino (AIST), K. Shimojima (AIST), H. Hosokawa (AIST), Y. Yamada (AIST), C. E. Wen (AIST) and H. Iwasaki (AIST) (2004) Superplasticity for solid-recycled AZ31 magnesium alloy. Trans. Mater. Res. Soc. Japan, 29, 2097-2100.

Y. Chino (AIST), M. Mabuchi, H.Nakanishi (Himeji Institute of Technology), H. Iwasaki (AIST), A.Yamamoto (Himeji Institute of Technology) and H.Tsubakino (Himeji Institute of Technology) (2004) Effect of metal powder size on the gas expansion behavior of 7075 Al alloy in a semisolid state. Mater. Sci. Eng., A382, 35-40.

Y. Chino (AIST), M. Mabuchi, S.Hagiwara (Himeji Institute of Technology), H. Iwasaki (AIST), A.Yamamoto (Himeji Institute of Technology) and H.Tsubakino (Himeji Institute of Technology) (2004) Novel equilibrium two phase Mg alloy with the long-period ordered struture. Scripta Mater., 51, 711-714.

Y. Chino (AIST), M. Mabuchi, H. Iwasaki (AIST), A.Yamamoto (Himeji Institute of Technology) and H.Tsubakino (Himeji Institute of Technology) (2004) Tensile properties and blow forming of 5083 aluminum alloy recycled by solid-state recycling. Mater. Trans., 45, 2509-2515.

C. E. Wen (AIST), Y. Yamada (AIST), T.Asahina (AIST), K.Kato (AIST), T.Sonoda (AIST), A.Watazu (AIST) and M. Mabuchi (2004) Effects of the density on compressive properties in cellular aluminum produced by the sintering method. Mater. Trans., 45, 327-329.

H. Hosokawa (AIST), T.Yamasaki (Himeji Institute of Technology), N.Sugamoto (Sumitomo Metal Mining Co., Ltd.), M.Tomizawa (Sumitomo Metal Mining Co., Ltd.), K. Shimojima (AIST) and M. Mabuchi (2004) Bending properties of nanocrystalline Ni-18at% W alloy produced by electrodeposition. Mater. Trans., 45, 1807-1810.

Y. Chino (AIST), H. Iwasaki (AIST) and M. Mabuchi (2004) Solid-state recycling for machined chips of iron by hot extrusion and annealing. J. Mater. Res., 19, 1524-1530.

山田康雄(産総研), 千野靖正(産総研), 馬渕守 (2004) 粉末冶金を利用したポーラス金属, 金属, 74, 662-666.

千野靖正(産総研), 馬渕守, 岩崎源(産総研), 山本厚之(姫工大), 椿野晴繁(姫工大)(2004) マグネシウム合金インハウススクラップ材の固体リサイクル, まてりあ, 43, 270-273.

H. Hosokawa (AIST), K. Shimojima (AIST), M. Kawakami (Fuji Die Co., Ltd.), S. Sano (Fuji Die Co., Ltd.), O. Terada (Fuji Die Co., Ltd.), and M. Mabuchi (2004) Role of the Co phase in superplasticity for WC-Co cemented carbides. Mater. Trans., 45, 1391-1394.

Y. Chino (AIST), M. Kobata (Nittech Research Co., Ltd.), K. Shimojima (AIST), H. Hosokawa (AIST), Y. Yamada (AIST), H. Iwasaki (AIST) and, M. Mabuchi (2004) Blow forming of Mg alloy recycled by solid-state recycling. Mater. Trans., 45, 361-364.

H. Hosokawa (AIST), K. Shimojima (AIST), and M. Mabuchi (2004) Surface roughness of a Co-less WC micro-die fabricated by focused-ion-beam machining. Philos. Mag. Lett., 84, 149-155.

T. Takida (Allied Material Corp.), H. Kurishita (Tohoku Univ.), M. Mabuchi, T. Igarashi (Osaka Pref. Univ.), Y. Doi (Toyama Industrial Technology Center), and T. Nagae (Toyama Industrial Technology Center) (2004) Mechanical properties of fine-grained, sintered molybdenum alloys with dispersed particles developed by mechanical alloying. Mater. Trans., 45, 143-148.

C. E. Wen (AIST), Y. Yamada (AIST), K. Shimojima (AIST), Y. Chino (AIST), H. Hosokawa (AIST), and M. Mabuchi (2004) Compressibility of porous magnesium foam: dependency on porosity and pore size. Mater. Lett., 58, 357-360.

寺田道直(奥村組),蛭子清二(奥村組),西山孝,楠田啓,川上靖典(セコム)(2004) ロックアンカー引き抜き試験で発生する亀裂の蛍光法による観察と破壊機構の考察,応用地質, 45, 2, 83-89.

喜多治之(三井住友建設), 伊藤俊秀(関西大学), 前川良太, 陳友晴, 西山孝 (2003) 三軸圧縮試験により形成されたマイクロクラックの細分類と破壊進展にともなう変化, 情報地質, 14, 241-247.

西山孝, 方堂毅, 山田将巳(東芝), 別所昌彦 (2003) シリカコーティングによる有害元素の流出防止に関する基礎的研究, 応用地質, 43, 390-395.

Nishiyama, T., Chen, Y., Kusuda, H., Ito, T. (Kansai University), Kaneko, K. (Hokkaido University), Kita, H. (Mitsui Construction Co. Ltd.), and Sato, T. (Nuclear Cycle Development Institute, Japan) (2002) The examination of fracturing process subjected to triaxial compression test in Inada granite. Engineering Geology, 66, 257-269.

辻上博司, 長坂芳充, 楠田啓, 西山孝, 中村和夫(大阪ガス), 山田研二(大阪ガス) (2002) 光学顕微鏡を用いたメタンハイドレートの識別と分解プロセスの考察, 資源と素材, 118, 3-4, 223-228.

伊藤俊秀(関西大学), 大村誠(高知女子大学), 西山孝, 前川靖也(三星砿業), 斎藤光義(三井金属資源開発) (2002) 愛宕鉱山における地質データベースの適用−地質データベースの有効性と採掘シミュレーションに必要な条件−, 応用地質, 42, 335-341.

西山孝, 楠田啓 (2001) メタンハイドレート開発の現状と将来, エネルギー・資源, 22, 152-156.

Omura, M. (Kochi Women's University), Ito, T. (Kansai University), Kimura, R., and Nishiyama, T. (2001) IKONOS high-resolution satellite imagery and its potential in open-pit mine management. Geoinformatics, 12, 211-217.

Chen, Y., Nishiyama, T., and Ito, T. (Kansai University) (2001) Application of image analysis to observe microstructure in sandstone and granite. Resource Geology, 51, 249-258.

別所昌彦, 梅原弘史, 高浦健, 西山孝, 新宮裕(関西新技術研究所) (2001) 生物起源珪藻土からの高純度シリカの製造について,資源と素材, 117, 736-742.

西山孝 (2001) 地球エネルギー論, オーム社, 東京. (ISBN4-274-13227-7)

Ito, T. (Kansai University), Omura, M. (Kochi Women's University), and Nishiyama, T. (2000) Evaluation of automatic photogrammetry system with digital imaging in an open pit mine. IGC, IGC31st.

Nishiyama, T., Liu, J., and Ito, T. (Kansai University) (2000) Economic growth and relationship between key metals and energy consumption. Second International Conference on Processing Materials for Properties, Ed. Mishra, B., and Yamauchi, C., pp.507-512.

Wajima, T., Okuda, S., Chen, Y., Bessho, M., and Nishiyama, T. (2000) Observation of pore spaces and microcracks using a fluorescent technique in some reservoir rocks of oil, gas and geothermal fields in the Green Tuff region, Japan. Resource Geology, 50, 191-200.

Kadoshin, S., Ito, T. (Kansai University), and Nishiyama, T. (2000) The trend in current and near future consumption from a statistical perspective. Applied Energy, 67, 407-412.

喜多治之(三井建設), 佐藤稔紀(核燃料サイクル開発機構), 辻上博司, 陳友晴, 西山孝, 金子勝比古(北海道大学) (2000) 温度履歴に伴う砂岩の間隙構造の変化, 資源と素材, 116, 656-661.

別所昌彦, 和嶋隆昌, 中澤克仁, 西山孝 (2000) アルミニウム塩添加による地熱水中の過飽和シリカの凝集沈殿, 資源と素材, 116, 131-135.

西山孝, 大村誠(高知女子大学), 伊藤俊秀(関西大学) (1999) 大規模露天鉱山におけるGPSの活用−米国Phelps Dodge Mining 社Chino鉱山を訪問して−, 資源と素材, 115, 267-270.

Chen, Y., Ito, T. (Kansai University), Kusuda, H., and Nishiyama, T. (1999) Image analysis of microcracks in rocks using software AVS, '99 Japan-Korea Joint Symposium on Rock Engineering, 549-559.

Ito, T. (Kansai University), Nishiyama, T., Omura, M. (Kochi Women's University), Takahashi, H. (Asia Air Survey Co., Ltd.), Hamada, H. (Asia Air Survey Co., Ltd.), Toyoyama, T. (Asia Air Survey Co., Ltd.), and Tanno, T. (Hitachi Zosen Information Systems Co., Ltd.) (1999) Obtaining digital topographic data using an automatic photogrammetry system, Geoinformatics, 10, 225-234.

新熊隆嘉(岐阜聖徳学園大学), 西山孝 (1999) 鉱山における不確実性下での開山・閉山・生産能力拡張に関する意思決定, 資源と素材, 115, 573-578.

Chen, Y., Nishiyama, T., Kusuda, H., Kita, H. (Mitsui Construction), and Sato, T. (Nuclear Cycle Development Institute) (1999) Correlation between microcrack distribution patterns and quarry planes of granitic rocks, Int. J. of Rock Mech. and Min. Sci., 36, 535-541.

角新史朗, 西山孝 (1999) エネルギー資源統計から見たエネルギー消費動向の現状と近未来, エネルギー・資源, 20, 192-197.

情報技術と露天採掘研究会編 (1999) 情報技術と露天採掘−GPS,デジタルカメラ,データベースの応用−, 古今書院, 東京. (ISBN4-7722-4013-6)

寺田道直(奥村組), 岩本容昭(奥村組), 西山孝, 陳友晴 (1999) 蛍光法によるグラウト浸透状況の可視化, 地盤工学会誌, 47-3, 29-32.

伊藤俊秀(関西大学), 大村誠(高知女子大学), 西山孝 (1998) GPSによる露天採掘鉱山の地形図作成と採掘計画, 資源と素材, 114, 939-944.

大村誠(高知女子大学), 伊藤俊秀(関西大学), 西山孝 (1998) 露天採掘鉱山の地形測量におけるRTK−GPS測量の適用, 資源と素材, 114, 699-703.

Nishiyama, T., and Fujii, H. (1998) Instabilities in the Consumption and Production for Cobalt, Nonrenewable Resources, 7-4, 281-285.

陳友晴, 西山孝 (1997) 研究室紹介・京都大学大学院エネルギー科学研究科エネルギー応用科学専攻資源エネルギー学講座資源エネルギーシステム学分野, 骨材資源, 112, 226-229.

西山孝 (1998) 長期的視点からの資源問題の行方, エネルギー・資源, 19, 23-28.

西山孝, 劉ジェ(1997) GDPとエネルギー消費動向から推察した中国のエネルギー需要見通し, エネルギー・資源, 18, 346-351.

小野勝敏(京都大学大学院エネルギー科学研究科), 西山孝 (1997) モリブデン資源の現状と将来, エネルギー・資源, 18, 266-270.

新熊隆嘉(京都大学大学院人間・環境学研究科), 藤井秀樹, 西山孝 (1997) 金属資源の価格形成メカニズムとその銅価格への適用, 資源と素材, 113, 805-810.

西山孝, 山中i(通産省) (1997) シュレッダーダストの処理の現状と課題, 資源と素材, 113, 1022-1026.

陳友晴, 西山孝, 喜多治之(三井建設), 佐藤稔紀(核燃料サイクル開発機構) (1997) 微小クラックの分類による稲田花崗岩と栗橋花崗閃緑岩の力学的弱面について,応用地質,38, 196-204.

西山孝(1996)資源社会論から見た深海底鉱物資源, エネルギー・資源, 17, 73-79.

伊藤俊秀(関西大学), 楠田啓, 西山孝 (1996) 砕石場の開発における景観シミュレーションの適用, 建設用原材料, 6-2, 7-15.

西山孝, 楠田啓, 陳友晴, 寺田道直(奥村組), 蛭子清二(奥村組), 萩森健治(奥村組) (1996) 蛍光法とボアホールテレビジョンシステムを用いた孔壁の割れ目の抽出, 応用地質, 36, 442-447.

Takashi Nishiyama (1996) Trends and Short-Term Prospects for Copper Demand, Nonrenwable Resources, 5, 155-168.

楠田啓, 西山孝 (1996) 蛍光塗料を用いた前処理による画像認識と解析−画像処理による鉱脈の抽出と解析例−, 資源と素材, 112, 589-593.

Nishiyama, T., and Kusuda, H. (1996) Application of a Fluorescent Technique to the Study of the Weathering Process, Engineering Geology, 42, 247-253.